Yes, the packaging can be reused if hygienic principles are observed. Before each new filling, the bottle and spray pump must be thoroughly cleaned and disinfected, ideally using a suitable alcohol, for example IPA 99 % isopropyl alcohol or 96 % denatured plant ethanol. Thorough disinfection helps minimise the risk of microbial contamination and contributes to the stability of the finished product.

The spray pump should be disassembled into its individual parts, rinsed with lukewarm water and a mild cleaning agent, and then rinsed with clean water. After mechanical cleaning, we recommend flushing the suction system and nozzle with a small amount of disinfectant alcohol to remove residues of the previous product. Before re-use, allow all parts to dry completely in a clean and protected place.

This bottle is particularly suitable for low-viscosity liquid formulations such as toners, hydrolats, light spray serums, aromatherapeutic and refreshing sprays, or disinfectant solutions for skin or surfaces. For thicker emulsions or oil blends with high viscosity, it is always necessary to test whether the spray pump can ensure smooth and even application without clogging the nozzle.

For longer shelf life, we recommend working with clean and disinfected packaging, using stable raw materials of appropriate quality and, for suitable formulations, considering the use of preservatives. Store the finished product in a dry place, protected from direct sunlight and major temperature fluctuations. Dark glass helps to limit the negative effect of light, but correct storage remains key to maintaining quality.

If you decide not to reuse the packaging, we recommend recycling it according to the material types specified in the product parameters. The glass part should be thoroughly rinsed after emptying and placed in the appropriate container for sorted glass waste. Sort the plastic components of the spray pump (head, tube, cap) according to their marking into the relevant plastic fraction. Always follow local waste separation rules and the information in the parameter table for the specific product on Handymade.

The simplest way to choose is to use the advanced filter, which you can find at the top of the page after clicking on the selected packaging category. Using the filter, you can clearly sort the products according to neck type, size, colour and material, which greatly facilitates finding the right bottle, jar or dispenser for a specific formulation. Thanks to the combination of several parameters, you will quickly narrow the selection down to packaging that meets your technical and aesthetic requirements.