The medicine bottle can, if hygiene rules are followed, be used repeatedly. Before each new filling, it is necessary to thoroughly clean the packaging, rinse it and then disinfect it with a suitable alcohol-based preparation, for example IPA 99% isopropyl alcohol or ethanol 96% denatured, plant-based. After disinfection, allow the bottle and cap to dry completely at room temperature and only then refill them to minimise the risk of microbial contamination.

Before the first filling, we recommend rinsing the bottle with warm water and a suitable cleaning agent, then thoroughly rinsing it with clean water so that no detergent residues remain. After washing, it is advisable to disinfect the packaging with an alcohol solution (e.g. isopropyl alcohol or plant-based ethanol) and allow it to dry completely in a clean place. Apply the same procedure to the cap, paying attention to thorough drying of the thread and seal.

Store the bottle in a dry and cooler place, away from direct sunlight and heat sources. It is important that it is always properly closed, which limits the access of air and moisture. For sensitive formulations, such as preparations with a higher proportion of natural oils or active substances, it is advisable to check the blending date and use smaller volumes that will be used within the recommended time. During transport, ensure that the cap is tightly screwed on and consider adding secondary packaging to protect the medicine bottle from impacts.

If you decide not to reuse the packaging, it is advisable to recycle it responsibly. After emptying and rinsing off product residues, discard the glass part of the bottle into the container designated for glass, according to local waste-sorting rules. Separate the plastic or composite cap with safety feature from the glass and discard it into the appropriate container according to the material type specified in the product parameters on Handymade.sk. In case of doubt, follow the recommendations of your recycling facility or municipal services so that sorting is as effective as possible.

To select the ideal packaging, you can use the advanced filter, which you can find at the top of the page after clicking on a specific packaging-material category. In the advanced filter it is possible to combine several criteria at once – for example the type and size of the neck, the overall size of the packaging, as well as colour and material. This allows you to easily narrow the offer down to bottles, medicine bottles, jars or pots that best match your formulation and desired design. When choosing, we recommend also taking into account the planned dosing method and the consistency of the product.

The glass medicine bottle is suitable for finished products as well as for testing samples. The smaller volume and high-quality closure allow convenient blending of trial batches, monitoring of stability and practical dosing in both laboratory and home conditions. When developing new formulations, you can use several pieces at the same time for comparative tests (for example different concentrations of preservatives or active substances) and then store them under the same conditions so that you can evaluate the results objectively. After the tests are completed, the packaging can be reused after thorough cleaning and disinfection.