GLASS BOTTLES 30 ml
Blue Glass Bottle, Glossy Silver White Pump, 30 ml
Pack size10 ml15 ml30 ml50 ml100 ml
The blue glass bottle with a pump is designed for serums, facial oils, light emulsions and liquid creams that are applied in small doses. full description
Lowest price in the last 30 days: €1.25
Total for 1 pcs: €1.25
Quantities add up across all combinations of this bottle.
Product description
The blue glass bottle with a pump is designed for serums, facial oils, light emulsions and liquid creams that are applied in small doses. The contents are dispensed with a single press without unscrewing anything, so no fingers or dirt from repeated opening get into the bottle. The medicine bottle made of blue glass reduces the light reaching the contents, which helps with oils and active ingredients that are sensitive to light. Both components of the set are declared suitable for contact with cosmetic products, and the declaration of conformity is provided with the product.
What the set is suitable for
- Facial serums and fluids – a liquid to slightly viscous consistency passes through the pump without problems, and a small dose is easy to measure.
- Facial and hair oils, oil serums – the blue glass protects oils from light, and the pump limits contact between the contents and your fingers.
- Light emulsions and facial milks – the pump draws a sufficiently liquid emulsion up through the dip tube and releases a clean dose without residue on the neck.
- Samples and travel sizes – the 30 ml volume is enough for several weeks of serum use, and the bottle is easy to transport.
Filling and dispensing
The nominal volume is the amount the bottle is designed for in normal filling. The brimful capacity given in the parameters is the physical volume up to the top of the neck. The difference provides a reserve for the dip tube and the pump body, which push part of the contents upwards when screwed on, and for the expansion of the contents when the temperature changes. For this reason, fill the bottle up to the nominal volume, never to the brim, otherwise the contents will overflow when you screw on the pump.
Before screwing the pump on for the first time, check the length of the dip tube. If it extends past the bottom of the bottle, shorten it with a diagonal cut so that it reaches just above the bottom. A diagonal cut prevents the tube from sticking to the bottom, and the pump can then draw up even the last millilitres.
After filling and screwing on the pump, prime it by pressing it several times until the dip tube and piston fill with the contents. One press releases approximately 0.14 ml. The actual amount varies with the viscosity of the contents and the force of the press, so when dispensing active ingredients we recommend measuring it with your own formulation.
Good to know
Preparation before first filling. Wash and rinse the bottle and let it dry completely. Rinse the pump by pumping clean water through it several times, then ethanol or isopropyl alcohol, and then let it dry with the dip tube pointing down. Moisture remaining in the piston would get into the first doses of the contents.
Viscosity of the contents. A pump with a dip tube works with liquid to medium-thick products. It draws up thick creams, butters and balms only with difficulty or not at all, or the dose may flow back along the walls. For borderline consistencies, we recommend test-filling one bottle and observing how the pump performs over several days.
The pump is not an airless system. With every dose, air is drawn into the bottle to replace the contents that have been dispensed. Preserve water-based formulations in the same way as in an ordinary bottle with a cap.
Materials and compatibility. Glass is inert towards cosmetic raw materials and also withstands alcohol-based tonics and anhydrous oil blends. The pump is made of polypropylene with an aluminium part. For blends with a higher proportion of essential oils or solvents, we recommend checking that long-term contact does not affect the seal and the operation of the piston. Glass does not tolerate sudden changes in temperature, so let a hot emulsion cool down before filling.
Reuse. After thorough washing and disinfection, the bottle can be refilled repeatedly. The pump is harder to clean, as residues of the contents remain in the dip tube and in the piston. When you change the formulation, pump ethanol through it, and when switching from oil-based to water-based contents, it is better to replace it with a new one. The bottle itself has an 18 mm neck. Closures, droppers and sprayers with the same neck type, as well as other ready-made combinations, can be found in the Handymade range; if you make your own combination, we recommend checking the tightness and dispensing with your specific formulation.
Recycling. Before disposal, unscrew the pump. The glass belongs in glass recycling; the pump is made of several materials and is sorted according to local rules.
Frequently asked questions
Parameters
Glass bottle, vial, blue, 18 mm, 30 ml
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.
























































































