+421 950 333 113info@handymade.storeActive Days: −10 % with code ACTIVE10Shop now

GLASS BOTTLES 15 ml

Clear Glass Bottle, Round, White Nasal Spray, 12 ml

Pack size10 ml12 ml15 ml30 ml50 ml100 ml

The glass bottle with nasal sprayer combines the bottle and the pump into a single set for thin aqueous solutions. full description

AvailabilityIn stock · 120 pcs
Product codeO18SP012-OVV18PBNASAL
€1.31incl. VAT

Lowest price in the last 30 days: €1.31

Volume pricing
1–199 pcs€1.31Your price
200–999 pcs€1.23−6 %
1000–4999 pcs€1.14−13 %
from 5000 pcs€1.02−22 %

Total for 1 pcs: €1.31

Quantities add up across all combinations of this bottle.

Product description

The glass bottle with nasal sprayer combines the bottle and the pump into a single set for thin aqueous solutions. With each press, the pump delivers a metered dose, so the solution is always applied in the same amount.

The small volume is suitable for personal packs and trial batches. Both the bottle and the pump are declared as suitable for contact with cosmetic products.


Features of the set

  • Metered dose – one press delivers approximately 0.12 ml, so the amount is determined by the number of presses.
  • Clear glass – it shows the fill level and any change in the appearance of the solution, such as cloudiness or sediment.
  • Reusable bottle – the glass can be washed, disinfected and filled again.
  • Bottle and pump together – both parts are supplied as one unit, so there is no need to look for a separate closure for the neck.

Filling and volume

With glass packaging, two values are distinguished. The nominal volume is the amount the bottle is intended for under normal filling. The brimful volume is the physical volume of the glass up to the neck, and you can find it in the parameters. The difference between them is the space for the body of the pump with its tube. The bottle is filled up to the nominal volume and the space above the liquid level is left empty.

After filling and screwing on the pump, press it several times to prime it. It will only start delivering a full dose once the solution has been drawn into the tube and the mechanism.


Preparation and use

Before the first filling, the bottle is washed, disinfected and left to dry completely. The disinfectant is also sprayed through the pump several times, and the pump must then dry as well. Aqueous solutions are filled into clean and dry packaging, and their preservation is addressed in the formulation.

Clear glass does not protect the contents from light. Store solutions containing light-sensitive ingredients in a box or in a closed cabinet.

The plastic parts of the pump may be sensitive to a higher proportion of essential oils, alcohol or other solvents. We therefore recommend checking compatibility with your specific formulation by a trial fill.

The bottle is made of glass, while the pump combines several materials: plastics, steel and glass. It is therefore separated from the bottle before waste sorting.

You can find the bottle on its own, other closures with the same neck type and other ready-made combinations in the Handymade range. If you make your own combination, we recommend checking the tightness, the dispensing and the behaviour of the packaging with your specific formulation.


Frequently asked questions

How many doses does a 12 ml nasal sprayer bottle deliver?
When filled to the nominal volume of 12 ml, the pump delivers approximately 100 doses, because one press corresponds to about 0.12 ml. The actual number is usually slightly lower. The first presses serve to prime the pump, and a small amount of solution remains in the bottle and in the mechanism.
Does a clear glass bottle protect the contents from light?
No, clear glass lets light through and does not protect the contents from it. Its advantage is that you can check the fill level and the appearance of the solution, and cloudiness or sediment is visible without opening the bottle. Light-sensitive contents should therefore be stored in a box or in a closed cabinet.
Can the glass bottle with nasal sprayer be reused?
The glass bottle can be reused: once empty, it only needs to be washed, disinfected and left to dry completely. The pump has an internal mechanism that cannot be cleaned thoroughly. With new contents, it is therefore safer to fit a new pump.
Is the nasal sprayer suitable for oil-based or thicker solutions?
Oil-based and thicker solutions are less suitable for the nasal sprayer, as the pump sprays thin aqueous solutions best. With oil-based and thicker contents, the dose size and the spray pattern may change. Solutions with undissolved particles may clog the pump. We recommend checking suitability for your specific formulation by a trial fill.
Why is the 12 ml nasal sprayer bottle not filled to the brim?
The bottle is filled only up to the nominal volume of 12 ml, because the body of the pump with its tube needs the space above the liquid level. The brimful volume is the physical volume of the glass up to the neck and is higher than the nominal volume. If the bottle were overfilled, the solution would overflow through the neck when the pump is screwed on.

Parameters

Glass bottle, vial, clear, round, 12 ml

Product colour
Clear
Country of origin
India
Nominal capacity
12
Brimful capacity
17 ml
Diameter
29 mm
Thread type
18/415
Height
61,6 mm
Product material
Glass

Nasal spray pump, white, 18/410

Product colour
WhiteClear
Country of origin
China
Diameter
22,7 mm
Thread type
18/410
Height
60 mm
Tube length
117 mm
Dose
0,12 ml

Product documentation

PPWRPackaging Declaration (PPWR)
Nasal spray pump, white, 18/410 · OVV18PBNASALPDF ↓
PDSProduct Data Sheet
Glass bottle, vial, clear, round, 12 ml · O18SP012PDF ↓
Nasal spray pump, white, 18/410 · OVV18PBNASALPDF ↓
DrawingTechnical drawing
Nasal spray pump, white, 18/410 · OVV18PBNASALPDF ↓
Download all (ZIP)

4 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.