GLASS BOTTLES 100 ml
Clear Glass Bottle, White Nasal Spray, 100 ml
Pack size10 ml12 ml15 ml30 ml50 ml100 ml
The clear glass bottle with nasal sprayer is a ready-made combination of packaging and closure for water-based cosmetic products that are applied in small doses as a fine mist. full description
Lowest price in the last 30 days: €1.46
Save €0.03 with this set
Total for 1 pcs: €1.46
Quantities add up across all combinations of this bottle.
Product description
The clear glass bottle with nasal sprayer is a ready-made combination of packaging and closure for water-based cosmetic products that are applied in small doses as a fine mist. The clear glass shows the contents and their purity, so cloudiness, sediment or the remaining amount can be seen without opening the bottle. The sprayer with an 18/410 neck finish has an applicator shaped for the nasal area and releases approximately 0.12 ml of liquid with one press. The set is declared suitable for contact with cosmetics, which covers both the bottle and the sprayer.
The nominal volume of the bottle is 100 ml. With this volume and a small dose, the filling lasts for a long time, so the set is suitable for low-viscosity products, for example thin solutions based on hydrosols or water that are applied repeatedly throughout the day.
How the set works
The bottle is medicine-bottle shaped, with a narrow neck onto which the sprayer screws just like an ordinary cap. The length of the sprayer dip tube is matched to this bottle, so it draws up the contents from the very bottom and the filling is used up almost completely. With every press of the actuator, the mechanism measures out the same dose, regardless of how much liquid remains in the bottle.
The sprayer consists of plastic parts and a metal part. The dip tube and the inside of the mechanism come into contact with the contents, so with your own formulation we recommend checking how the filling behaves in contact with these materials.
Before first use, prime the sprayer by pressing the actuator several times until the dip tube and chamber fill and the sprayer starts to spray evenly. Do the same after any longer period of non-use.
Nominal and total volume
The nominal volume is the amount the bottle is designed for in normal filling. The brimful volume is the physical volume up to the neck and can be found in the parameters. The difference between them leaves room for the dip tube and for the part of the sprayer that extends into the neck, as well as for the expansion of the contents when the temperature changes. For this reason, fill the bottle up to the nominal volume, not to the brim. If it is overfilled, the liquid is pushed out through the thread when the sprayer is screwed on and the bottle leaks.
Preparation and filling
Before the first filling, wash the bottle, disinfect it with isopropyl alcohol or ethanol and let it dry completely. Rinse the sprayer with clean water and let it dry as well. Residual water in the dip tube would dilute the filling and shorten the shelf life of preservative-free products. Let a hot filling cool to at least lukewarm before pouring.
Clear glass does not protect the contents from light. Store products containing light-sensitive ingredients in the dark or choose dark glass.
Good to know
- Water-based and thin fillings – the sprayer is designed for low-viscosity liquids. Oils and thicker mixtures may not spray as a mist, they come out in drops and the mechanism may become clogged.
- Cosmetic use – the set is declared for contact with cosmetics. For any other type of product, check the requirements that apply to it, as the declaration for this set does not cover them.
- Food contact – only the glass bottle on its own has a certificate for direct food contact. The sprayer does not have one, so the set as a whole is not intended for food use.
- Reuse – the bottle can be washed, disinfected and filled again. Rinse the sprayer and pump it through a few times; replace a clogged or hardened mechanism.
- Recycling – unscrew the sprayer before disposal. The glass goes with glass; the sprayer is a mixed material and is sorted separately.
Closures with the same neck type and other ready-made bottle + closure combinations can be found in the Handymade range. With your own combination, we recommend checking the tightness, dispensing and behaviour of the packaging with your specific formulation.
Frequently asked questions
Parameters
Glass bottle, vial, clear 100 ml
- Product colour
- Clear
- Country of origin
- European Union
- Nominal capacity
- 100
- Brimful capacity
- 108 ml
- Diameter
- 45 mm
- Thread type
- 18/410
- Height
- 116,2 mm
- Dimensions
- Ø 45 × 116,2 mm
- Product material
- Glass
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.















































































