NEW PRODUCTS IN THE OFFER!
Nakúp ešte za 23,50€a dopravu máš zadarmo
Would you like to create account?
The glass bottle with a transparent body and a black‑gold glossy dispenser represents an elegant and functional cosmetic packaging solution suitable for a wide ... read more
1,14 € incl. VAT
The glass bottle with a transparent body and a black‑gold glossy dispenser represents an elegant and functional cosmetic packaging solution suitable for a wide range of liquid products. Thanks to the high‑quality glass and precise dispensing, it is ideal for formulas where control of consumption, cleanliness of application and a professional appearance of the finished product are important. This type of packaging is extremely suitable for filling various cosmetic emulsions, serums or lighter oil blends that require practical and hygienic application directly from the dispenser.
The transparent glass bottle allows for visual control of the contents, which is advantageous for products where it is important to monitor colour, clarity or the remaining amount. The rigid glass container in combination with a high‑quality dispenser helps protect sensitive formulations from excessive contact with air and minimises the risk of contamination during use. In combination with a suitable formula, you thus obtain a durable, reusable and aesthetically attractive package that supports the perceived quality of your product.
This glass bottle with dispenser is among the packs that are offered on Handymade.sk as a ready‑made combination bottle + dispensing closure. Combinations of packs and closures that are created directly on Handymade are tested and functional. However, for all combinations we recommend always performing your own compatibility test – verifying the sealing, the reliability of dispensing and the behaviour of the packaging in contact with the specific formulation, so that you can be sure that the solution will be suitable for your product in the long term.
All technical parameters of the packaging are listed in the attached Packaging Quality Certificate and in the product parameters.
When selecting suitable packaging, we recommend paying attention to the data in the technical documentation, in particular information on the type of glass, possible uses, the recommended cleaning method and any limitations when combining with specific raw materials or concentrations of active substances.
If you decide not to recycle the packaging after it has been used up, but to use it further, always check its condition, the functionality of the dispenser and the cleanliness of the internal parts to ensure that the final product is safe and stable throughout its entire period of use.
Yes, the glass bottle with dispenser can be used repeatedly if hygiene principles are observed. Before each new filling, the packaging must be thoroughly cleaned and then disinfected with a suitable alcohol‑based product, for example isopropyl alcohol (IPA 99 %) or ethanol (Ethanol 96 % denatured plant‑based). After disinfection, allow the bottle and the dispenser to dry completely, check the functionality of the mechanism, and only then refill the packaging.
We recommend first rinsing the bottle with the remainder of a suitable carrier (for example a vegetable oil or hydrolate – depending on the type of the original filling), then washing it with warm water and a mild detergent and rinsing thoroughly. After washing, it is advisable to disinfect the interior of the packaging with alcohol, for example with the products IPA 99 % isopropyl alcohol or Ethanol 96 % denatured plant‑based. The dispenser needs to be rinsed in the same way and pressed several times so that the cleaning and disinfecting mixture also passes through the internal channel. Before refilling, the packaging must be completely dry.
Even dispensing depends on the viscosity of the product and on correct preparation of the packaging. After filling the bottle, we recommend closing the dispenser firmly and pressing it several times so that the system is “primed” and expels excess air. For thicker emulsions or oils, it may be necessary to perform the first presses more firmly. Before serial production, it is advisable to carry out a compatibility test – testing the behaviour of the dispenser during long‑term use, exposure to normal temperatures and handling, so that you can be sure that the selected packaging is optimal for your specific formulation.
If you decide not to reuse the packaging, we recommend recycling it responsibly in accordance with the information given in the parameter table for the product. The glass part of the bottle can generally be emptied, if necessary rinsed free of product residues, and placed in the appropriate glass container. The dispenser and plastic parts should be separated from the bottle and, according to the material marking, sorted into the appropriate type of separated waste or into mixed waste if local rules do not allow otherwise. Always adapt recycling recommendations to the official instructions of your municipality and to the data in the product parameters on the website.
On Handymade.sk you can use the advanced filter, which will help you quickly find suitable packaging for a specific product. The advanced filter is located at the top of the page after clicking on the selected packaging category (for example bottles, jars, pots). Thanks to it, you can conveniently filter by neck type, required size, colour and material of the packaging, and, if needed, by additional parameters. In this way you can easily choose a package that will correspond to your brand design as well as to the technical requirements of your formulation.
