GLASS BOTTLES 15 ml
Clear Glass Bottle, Black Spray, 15 ml
Pack size10 ml12 ml15 ml30 ml50 ml100 ml
The clear glass medicine bottle with a fine mist sprayer, 15 ml , is intended for filling and dispensing liquid cosmetic products applied as a spray: facial toners, hydrosols, hair sprays, perfume waters and refreshing… full description
Lowest price in the last 30 days: €0.63
Total for 1 pcs: €0.63
Quantities add up across all combinations of this bottle.
Add 99 more pcs and the price drops to €0.60/pc.
Product description
The clear glass medicine bottle with a fine mist sprayer, 15 ml, is intended for filling and dispensing liquid cosmetic products applied as a spray: facial toners, hydrosols, hair sprays, perfume waters and refreshing face and body mists. The clear glass shows the colour and clarity of the contents, which is useful for samples, testers and small batches where the customer wants to see what they are buying. The black sprayer adds contrast to the packaging and allows application without pouring and without fingers touching the contents. Both the bottle and the sprayer are declared suitable for contact with cosmetics.
What the set is suitable for
Its small volume makes this medicine bottle suitable packaging for travel sizes, samples and testers that are used up quickly. In cosmetics making, it is best suited to low-viscosity products:
- Toners and hydrosols – the sprayer applies the water phase evenly to the skin without a cotton pad.
- Perfume waters and body mists – alcohol-based fragrance solutions are dispensed in small amounts and the contents are not wasted.
- Hair and fabric sprays – light solutions and infusions that are meant to spread over a larger area.
- Fresheners and disinfectant solutions – thin liquids without solid particles.
Thick serums, gels and pure vegetable oils do not belong in this type of packaging. The sprayer does not atomise them evenly, the dose comes out as a stream or a drop, and the mechanism can become blocked. For oil-based and viscous products, a medicine bottle with a dropper or a pump is more suitable.
Volume and filling
The nominal volume is the amount the packaging is designed for under normal filling. The brimful volume is the physical volume of the bottle up to the neck, and you will find it in the parameters. The difference between the two provides a reserve for the dip tube and the body of the sprayer, which take up part of the space once screwed on, and for the expansion of the contents with changes in temperature. For this reason, fill up to the nominal volume, not to the brim. If the bottle is overfilled, the contents are pushed out through the thread when the sprayer is fitted, or spill after the first press.
After filling and screwing on the sprayer, press it several times to prime it until the tube fills and the mist starts to come out. The first presses draw in only air, which is not a defect of the packaging.
One press releases a small measured dose, the volume of which is stated in the sprayer parameters. This kind of dispensing suits products where only a thin layer is applied, for example perfumes or facial mists.
Good to know
Clear glass does not filter light. Store hydrosols with essential oils and products with vitamins or light-sensitive plant extracts away from direct sunlight, or choose amber or blue glass for them. For perfume waters, toners without sensitive active ingredients and samples used for a short time, clear packaging can be used without restriction.
Before the first filling, wash the bottle, disinfect it with isopropyl alcohol or ethanol and let it dry completely. Rinse the sprayer with clean water by spraying it through and let it drain. Residual water would dilute the contents and can cause cloudiness in alcohol-based solutions. The glass withstands repeated washing and hot water. Wash the polypropylene sprayer with lukewarm water and do not expose it to temperatures at which plastic softens.
For contents with a high proportion of alcohol or essential oils, we recommend checking the tightness and function of the sprayer with your specific formulation on a single piece before filling the whole batch.
The set is intended for cosmetic products and is not declared for contact with food. After use, the bottle can be refilled and the sprayer replaced with a new one with the same thread type. You will find closures with the same neck type as stated in the bottle parameters, as well as other ready-made combinations, in the Handymade range. When making your own combination, always check the tightness and behaviour of the packaging with your specific contents.
For recycling, the glass and the plastic sprayer are sorted separately, so unscrew the sprayer before disposal.
Frequently asked questions
Parameters
Clear glass bottle, 18 mm, 15 ml
Plastic fine mist sprayer, 18/415, black, 115 mm
Product documentation
- PPWRPackaging Declaration (PPWR)
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.























































































