Choosing a wooden wick depends mainly on the diameter and shape of the container, the type and composition of the wax and any additives (colourants, fragrances). We recommend first making test candles in a small series and observing the behaviour of the flame, the rate of wax melting and the formation of the carbon layer. If the flame is too small, a wider wick or a combination of several pieces may be needed; in the case of excessive smoking, choose a smaller wick diameter or adjust the percentage of fragrance. Each new formulation and container should be tested individually.

The candle container must be clean, dry and free from dust or oil residues. Before filling, it is advisable to mechanically clean the interior of the container and degrease it if necessary. We recommend fixing the wooden wick to the centre of the bottom using a suitable holder or an adhesive dot so that it is stable and vertical when the wax is poured. After pouring, allow the candle to cool completely and then check whether the wick has remained in the centre and whether the height has been trimmed to the recommended length before the first lighting.

Yes, suitable glass or other heat-resistant containers can be reused after the candle has burned out, in compliance with hygiene principles, to make a new candle or for other purposes. Remove wax residues mechanically and in an appropriate manner according to the type of wax; then wash the packaging thoroughly. Before refilling, we recommend cleaning and disinfecting the packaging, for example using isopropyl alcohol or ethanol offered by Handymade – IPA 99 % isopropyl alcohol or Ethanol 96 % denatured vegetable. This supports hygiene, safety and a longer service life of the packaging.

After the candle has burned out, first remove the wax residues and any metal or other wick holders. Containers that you decide not to reuse should be placed in sorted waste according to the material stated in the parameters of the specific product (for example glass in the glass container, metal lids with metals, etc.). Remove the wood from the wick after it has completely cooled and dispose of it in mixed waste, unless local recycling rules provide otherwise. Always follow the recommendations of your local waste collection company and the information in the parameter table for the given container on the Handymade website.

To select a suitable container for candles or other products you can use the extended filter in the packaging categories. This filter is located at the top of the page after clicking on the relevant category (for example bottles, pharma bottles, jars, pots or candle containers). In the extended filter you can sort packaging by neck type, size, colour and material, which significantly facilitates the selection of compatible packaging for a specific product and the chosen type of closure or design.