Yes, the packaging can be used repeatedly if hygiene rules are observed. Before each new filling, it is necessary to thoroughly clean the bottle, the spray pump and all contact parts and then disinfect them with a suitable alcoholic preparation, for example technical isopropyl alcohol IPA 99 % or plant-based ethanol Ethanol 96 %. After disinfection, allow all parts to dry completely so that no moisture remains in the packaging.

The bottle with spray pump is ideal for liquid products that are applied in a fine mist or in a thin layer – typically facial and body sprays, floral waters, hair tonics, hand disinfectant solutions or air and fabric fresheners. For thicker or gel formulations, we recommend considering the use of a pump or another type of dispenser, because they may not be suitable for spraying.

Before the first use, we recommend rinsing the glass bottle with clean water and, if necessary, with a mild cleaning agent that does not leave residues. It is then appropriate to disinfect the packaging with alcohol, for example with the products IPA 99 % or Ethanol 96 %. It is sufficient to rinse the spray pump and its tube and then “pump through” a small amount of alcohol by short spraying so that the entire dosing system is disinfected. After treatment, allow all parts to dry thoroughly.

If you decide not to reuse the packaging, we recommend recycling it according to the recommendations given in the product parameters. After removing any remaining contents and separating the plastic spray pump, dispose of the glass bottle in the container designated for glass. The spray pump, which usually consists of plastic and metal parts, should be sorted according to local rules – it usually belongs in mixed waste or plastic waste, depending on its composition and the sorting options in your region. Always follow local recycling rules and the information in the parameter table for the product.

When choosing a suitable bottle or pharmaceutical bottle, we recommend using the advanced filter, which you will find at the top of the page after clicking on the selected packaging category. With the help of the filter, you can clearly narrow down the range according to parameters such as neck type, packaging size, colour and material. In this way, you will quickly find a packaging that best matches your formulation, the desired dosing and the visual style of your brand.

When filling, it is important to work in the cleanest possible environment and to use clean tools in order to minimise the microbial load of the product. Do not overfill the packaging; leave a small air gap so that the spray pump works correctly and leakage does not occur. When storing, follow the recommendations for the specific formulation – usually storage in a dry, cooler and shaded place, away from direct sunlight and sources of heat. For products containing volatile or sensitive substances, it is important to keep the bottle always well closed.