The dropper is primarily designed for thin to medium-viscosity liquids such as facial oils, serums, toners or hydroalcoholic solutions. With very thick oils or gel-like textures, dosing may be slower, so we recommend performing a trial filling and verifying whether the flow rate and drop size are suitable for the specific formulation.

The dropper can be reused provided that basic hygiene principles are observed. Before each new filling, the packaging and the dropper must be thoroughly cleaned and then disinfected with a suitable alcohol-based preparation, for example isopropyl alcohol or ethanol. For disinfection you can use products available on Handymade.sk, such as IPA 99 % isopropyl alcohol or Ethanol 96 % denatured plant-based. Only after complete drying is the dropper ready for further use.

The method of recycling depends on the material composition stated in the product parameters for the specific packaging. Before discarding the dropper, we recommend first considering its reuse after thorough cleaning and disinfection. If you decide to dispose of it, follow the recycling recommendations according to the materials listed in the parameter table – individual parts of the dropper may belong in different collection containers (for example the plastic component in sorted plastic waste according to the material marking). It is always advisable to remove any product residues and place the packaging in sorted collection clean and mechanically safe.

The dropper is designed so that, with a correctly selected compatible vial and proper closing, it provides good sealing under normal conditions of use and transport. We recommend always performing your own test on the filled packaging – verifying the tightness when turning upside down, gentle shaking and short-term transport, using the specific formulation you plan to use. This way you will gain confidence that the combination of packaging and dropper is suitable for your product.

To make selection easier, you can use the advanced filter located at the top of the page after clicking on the chosen packaging category. In the filter you can clearly select parameters such as neck type, size, colour or packaging material and display only those bottles, vials, jars or pots that meet your requirements. This way you can quickly find a suitable combination of packaging and closure or dropper for a specific product.

You can extend the service life of the dropper through gentle handling and appropriate storage. It is recommended not to overload the thread when tightening, to avoid contact with sharp objects and to use mild soapy solutions without aggressive abrasive cleaners for cleaning. With repeated use, always ensure thorough rinsing and disinfection with a suitable alcohol and allow all parts to dry completely in order to minimise the risk of microbial contamination of the contents during the next filling.