Always use the dropper on a firmly closed and correctly screwed-on bottle or medicine bottle. Gently tilt the bottle and, depending on the required dosing intensity, regulate the pressure on the head or the intensity of the tilting. After application, wipe the dropper free of any product residues so that the neck of the bottle does not become sticky and the closure remains clean. When working, avoid direct contact of the opening of the dropper with the skin in order to minimize the risk of introducing impurities into the contents of the container.

The dropper can be reused provided that basic hygiene principles are observed. Before each new filling, we recommend disassembling the packaging, thoroughly cleaning it mechanically and then disinfecting it with a suitable agent, for example IPA 99 % isopropyl alcohol or ethanol 96 % denatured plant-based. In this way you reduce the risk of microbial contamination during repeated use and preserve the quality of the packaged product. When switching to completely different types of formulations (for example from oil-based to water-based), it is advisable to consider using a new dropper.

First clean the dropper mechanically of product residues, for example by rinsing it with a suitable cleaning medium according to the type of formulation (water, mild detergent or, where appropriate, a suitable solvent). We then recommend disinfection using IPA- or ethanol-type agents in an appropriate concentration in order to reduce the microbial load. After cleaning, allow all parts to dry completely at room temperature before reassembling and using the dropper again. This will support the long-term maintenance of the functionality of the dosing mechanism.

If you decide not to reuse the dropper, we recommend first removing any product residues and, where possible, disassembling it into individual parts (for example plastic closure, insert, any other components). Adjust the method of sorting and recycling to the information on the material composition stated in the parameter table for the specific product on the Handymade.sk website. According to this information, you will place the individual parts in the appropriate containers for sorted waste, thereby supporting responsible handling of packaging material.

To choose suitable packaging, you can use the extended filter, which you will find at the top of the page after clicking on the selected packaging category. In the filter you can clearly set parameters such as neck type, size, colour or packaging material. Thanks to this, you can easily select a compatible bottle, medicine bottle or jar for the dropper or another closure and adapt the packaging to the specific formula as well as to the desired visual style.