Before first use, we recommend thoroughly rinsing the bottle and spray pump with warm water and a suitable cleaning agent, then allowing them to dry completely and disinfecting them before filling. For disinfection of the inner surface of the glass and the parts that come into contact with the product, it is appropriate to use alcohol-based preparations, for example isopropyl alcohol or ethanol. On Handymade you will find, for example, the products IPA 99 % isopropyl alcohol or Ethanol 96 % denatured plant-based. After applying the alcohol, allow the packaging to air out thoroughly and dry so that no solvent residues remain inside.

Yes, the bottle and spray pump can be reused if hygiene principles are observed. Before each new filling it is necessary to thoroughly clean the packaging, check the mechanical parts of the spray pump and ensure that no residues of the original product remain in the system. Immediately before filling, we recommend disinfecting the packaging with a suitable alcohol – for this purpose you can use, for example, the products IPA 99 % isopropyl alcohol or Ethanol 96 % denatured plant-based. At the same time, it is advisable to consider whether the new formulation, in terms of product type and viscosity, is suitable for this type of spraying.

For long-term functionality, it is important to protect the spray pump from clogging and mechanical damage. For formulations containing more solid particles (for example herbal extracts with small plant residues) we recommend filtering the contents before filling. After the product has been used up, it is suitable to pump clean water several times to flush the internal channels. If you plan a longer break in use, it is practical to clean the spray pump, allow it to dry and store it in a dry place, away from direct sunlight and sources of heat.

If you decide not to reuse the bottle, we recommend recycling it responsibly. The glass part must be separated from the plastic spray pump and from springs or other metal parts. Dispose of the glass in the container designated for glass waste according to local regulations, the plastic components of the spray pump in the plastic container, and any metal parts in the metal waste, if this is collected separately in your municipality. When sorting, always follow the material information given in the product parameters on the website and the local waste management rules so that recycling is as effective as possible.

To make it easier to navigate the range of packaging materials, you can use the advanced filter located at the top of the page after clicking on the selected category (for example bottles, jars or spray pumps). In the filter you can narrow down the offer according to several parameters – most often according to the type of neck, the required size, colour or material of the packaging. Thanks to this, you will quickly find a suitable combination of container and closure or dosing system for a specific product and you can compare several alternatives within one category.