GLASS BOTTLES 50 ml
Clear Frosted Glass Bottle, Black Spray, 50 ml
This 50 ml frosted glass bottle with a black fine mist sprayer is designed for filling with liquid cosmetic products applied as a spray: facial toners, hydrosols, refreshing sprays, hair waters and light perfume waters. full description
Lowest price in the last 30 days: €0.98
Total for 1 pcs: €0.98
Quantities add up across all combinations of this bottle.
Product description
This 50 ml frosted glass bottle with a black fine mist sprayer is designed for filling with liquid cosmetic products applied as a spray: facial toners, hydrosols, refreshing sprays, hair waters and light perfume waters. The matte, frosted glass diffuses incoming light and shows the contents only as a silhouette, while the fill level remains visible. Both the sprayer and the bottle are declared suitable for contact with cosmetics. The set is not approved for contact with food.
The set is supplied as a ready-made pair, so there is no need to look for a closure with a matching neck. The bottle has an 18 mm neck finish, the sprayer is made of polypropylene (PP) and delivers approximately 0.14 ml per press. This dose is enough to evenly moisten the skin or neck without dripping, which makes the set particularly suitable for products applied several times a day in small amounts.
What the set is suitable for
- Facial toners and hydrosols – low-viscosity water-based products pass through the sprayer without resistance and the mist spreads evenly over the skin.
- Refreshing and setting sprays – the small volume fits into a handbag as well as hand luggage.
- Hair sprays and spray conditioners – light water-based or water-alcohol formulations applied to the lengths of the hair.
- Perfume waters and body sprays – alcohol-based fragrance solutions in a glass bottle that does not take on the fragrance of its contents.
- Samples and test batches – when developing a new formulation, a small amount is enough to check how the product behaves when sprayed.
Filling and volume
The nominal volume is the amount the bottle is designed for in normal filling. The brimful capacity is the physical volume up to the neck, which you can find in the parameters. The difference between the two values leaves room for the sprayer tube and for the space the contents need when the temperature changes. Fill the bottle to the nominal volume, not to the brim. If it is overfilled, part of the contents may overflow when the sprayer is screwed on, and the tube is harder to insert.
Before screwing on the sprayer, check that the tube rests on the bottom and is not bent. After screwing it on for the first time, press the sprayer several times to prime it until the tube fills and the mist is even.
Thicker products, oils and emulsions do not belong in this set. The sprayer is designed for liquids with a viscosity close to water. An oil would clog the nozzle or come out as a stream instead of a mist. For water-alcohol formulations with a higher alcohol content, check the tightness and spray quality on a small sample after several days.
Good to know
- Before the first filling, wash the bottle and sprayer, disinfect them with isopropyl alcohol (IPA) or ethanol and leave them to dry completely.
- Reuse – the glass can be refilled repeatedly, and so can the sprayer if you rinse it with water and a disinfectant solution after emptying. When switching from a formulation with a strong fragrance, the original fragrance may linger briefly in the plastic parts.
- Filling temperature – do not pour hot solutions into the bottle, as a sudden change in temperature stresses the glass. Let the product cool to room temperature before filling.
- Sprayer and solvents – for formulations with a high proportion of essential oils or other solvents, check in advance that the seal and nozzle are not affected.
- Light protection – frosted glass does not fully protect the contents from light; it only diffuses it. Store light-sensitive products out of direct sunlight.
- Recycling – unscrew the set before disposal. The glass bottle belongs with glass, the PP sprayer with plastics.
The set is not approved for contact with food. Use it only for cosmetic products. For homemade syrups, oils or edible extracts, choose packaging with the relevant certification.
If you would like a different closure for the bottle or a sprayer with a different height, you will find closures with the same neck type and ready-made combinations in the Handymade range. When making your own combination, check the tightness, dispensing and behaviour of the packaging with your specific formulation.
Frequently asked questions
Parameters
Glass bottle, frosted clear, 18 mm, 50 ml
Plastic fine mist sprayer, 18/415, black, 115 mm
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.























































































