Clear Glass Bottle with Roll-On, 5 ml

We recommend using the advanced filter, which you will find at the top of the page after clicking on the relevant packaging category. With it, you can filter packaging by neck type, size, colour and material, so you can quickly choose the bottle, vial or other packaging that best matches your product and the technical requirements of filling.

Yes, the glass packaging can be used repeatedly provided that hygiene principles are observed. Before each new filling, the bottle, roll-on ball and cap must be thoroughly cleaned and then disinfected with a suitable product, for example isopropyl alcohol or ethanol. For disinfection you can use the products IPA 99 % isopropyl alcohol or Ethanol 96 % denatured plant-based. This will reduce the risk of microbial contamination and maintain the safety of the final product.

The roll-on bottle is ideal for concentrated preparations that are applied in small amounts directly onto the skin. Most often these are facial and eye serums, local treatments for problem areas, aromatherapeutic oils for pulse points or natural perfumes. It is particularly suitable for liquid and oil-based formulations of appropriate viscosity so that the contents can flow smoothly under the roll-on ball and ensure even application.

Before the first filling, we recommend mechanically cleaning the bottle from any dust, then rinsing it and allowing it to dry in a clean environment. After drying, it is advisable to disinfect the inner surface and all parts that come into contact with the product (including the roll-on ball and cap). For disinfection, you can use for example IPA 99 % isopropyl alcohol or Ethanol 96 % denatured plant-based. Only after the disinfectant has completely evaporated is the bottle ready for filling.

Before serial filling, we recommend preparing a test sample of the product and filling several bottles, which you then leave to stand for a certain time under conditions similar to real use (temperature, handling). Monitor in particular the sealing around the roll-on ball and cap, the smoothness of dosing, any leakage, changes in scent or colour, and the behaviour of the plastic components in contact with oils, alcohol or active ingredients. If everything is in order after the test period, the combination of packaging and formulation is suitable for regular use.

If you decide not to reuse the packaging, we recommend recycling it according to the material composition stated in the product parameters. The glass bottle can usually be handed over to the appropriate separated glass collection after basic rinsing to remove product residues. The plastic components of the roll-on system and cap are separated from the bottle and sorted according to the type of plastic in line with local waste collection rules. By respecting the recommendations resulting from the packaging parameters and local recycling rules, you contribute to more efficient sorting and to reducing the environmental burden.