Before the first filling, we recommend thoroughly cleaning and disinfecting the glass bottle, the internal parts of the spray mechanism and the dip tube. It is suitable to rinse the packaging with distilled water and then disinfect it with an appropriate alcohol-based preparation, for example isopropyl alcohol or ethanol. After disinfection, let all parts dry completely at room temperature and only then fill the bottle with your product.

Yes, the glass packaging can be used repeatedly if hygienic principles are followed. With each new filling, it is necessary to thoroughly clean and disinfect the bottle and all parts of the mechanism in order to minimize the risk of contamination. For disinfection, we recommend using high-quality alcohol-based preparations, such as isopropyl alcohol IPA 99 % isopropyl alcohol or plant-based ethanol Ethanol 96 % denatured plant-based. After thorough rinsing and drying, you can safely refill the bottle with your product.

Always store the filled bottle well closed, in an upright position, away from direct sunlight and heat sources. It is recommended to store it in a dry, clean and stably tempered place in order to preserve the quality of the contents as well as the functionality of the spray mechanism. Avoid mechanical stress and strong impacts, as the glass packaging could be damaged or broken.

For normal use, it is sufficient to keep the nozzle clean and dry, without visible impurities. If necessary, the nozzle can be carefully wiped with a clean, disinfected cloth or a moistened pad. When repeated use of the packaging with a new filling is planned, we recommend disassembling the mechanism as far as the construction allows, rinsing it with a suitable medium and then disinfecting it with an alcohol solution. After complete drying, the mechanism can be reattached and used safely.

The simplest way to choose the right packaging is to use the extended filter in the packaging category. After clicking on the relevant category at the top of the page, you will find the option to filter products according to key parameters – especially according to neck type, size, colour and material. Thanks to this, you can quickly narrow down the selection to packaging that is technically and visually suitable for your specific product.

If you decide not to use the packaging further, we recommend first completely emptying it and, if possible, rinsing it from any residue of the contents. The glass body of the bottle belongs in the container designated for glass according to local waste sorting rules. The spray mechanism consists of a combination of plastic and possibly metal parts, so it should usually be separated from the glass and thrown into mixed waste, unless the local collection system allows specific sorting of these components. Recycling recommendations may vary slightly depending on the material markings given in the product parameters, so it is worth checking this information as well and proceeding in accordance with the local waste sorting system.